For switchboards. Type 2 protection. Imax= 15kA
Module for protection against transient overvoltages caused by atmospheric discharges, switching operations in electrical circuits and electrostatic discharges.
For BIPHASEcircuits, phase+phase, it is not valid for phase+neutral circuits, in this case V2T-15 must be used.
This content is restricted.
You need to be logged in to download the manuals.
CODE | REFERENCE |
10002749 | V2T-15B |
SPECIFICATIONS | VALORES |
Rated voltage Un | 230 VAC |
Maximum voltage Uc | 320 VAC |
Frequency | 50-60 Hz |
Protection level Up (L/L) | ≤1,5 kV |
Protection level Up (L/PE) | ≤1,5 kV |
Maximum discharge intensity (8/20μs) Imax (L/L) | 15 kA |
Maximum discharge current (8/20μs) Imax (L/PE) | 15 kA |
Rated current (8/20μs) In (L/L) | 8 kA |
Rated current (8/20μs) In (L/PE) | 8 kA |
Overvoltage response time | ≤25 ns |
Maximum cable cross-section at terminals | 16 mm² |
Maximum pre-fuse | 63 A gL |
Dimensions (W x H x D) mm | 18 x 90 x 71 |
Mounting | Rail DIN 35 |
Product standards | IEC 61643-11 / EN61643-11 |
Clase | II |
Temperature ranges | -40º… +80º C |
Degree of protection | IP20 |
Fault indication | Window |
Average weight approx. | 140 g |
No. of DIN modules | 1 |
It avoids the damage that these transient overvoltages may cause to the equipment supplied by this network.
This equipment DOES NOT PROTECT against PERMANENTpower surges.
PRODUCTS RELATED
CONTACT WITH US
Development and manufacturing of electronic products and system integration: pump protection, level control and surge protection.
Links
Contact
© Toscano 2021 · All rights reserved | Quality and environmental policy |Legal notice | Privacy policy | Cookie policy
Si tienes preguntas o ideas que te gustaría compartir, envía un mensaje. Para algo más específico, por favor usa nuestros teléfonos de contacto.
Departamento comercial
Dirección
If you have questions or ideas you’d like to share, send us a message. For something more specific, please use one of the addresses below.
SalesDepartment
TechnicalSupport
Address