Description

Modular control and protection panel for 1 pump up to 18A, 230 or 400 VAC, multi control.

• Plug-in control module TZ1: simple adjustment and complete status indication.
• Higher safety and better immunity for the user.
• More space interior and greater comfort.
• More possibilities of control (probes, timer reset, pressure switch, 4-20mA sensor, float, clock, programmer, radio, GSM, presscontrol…).

Technical characteristics:

• Power supply voltage: 230VAC or 400VAC (depending on model), -20%…+30%, 50/60Hz
• Pump / motor current range: 0.5…18A / AC3
• Protections: underload, overload, phase failure, overvoltage, pump wiring failure
• Level control:
  • two probes
  • a timed probe
  • without probes
  • flow detector
• Inhibition time: 15, 30, 60 or 90 seconds (selectable)
• Low load setting: OFF – 0.5…21A (alarm trip in 4 seconds)
• Overload setting: 0.5…21A (alarm trip in 7 seconds)
• Reset time: deactivable (OFF), or from 3 minutes to 8 hours (adjustable)
• Voltage in control: 12V
• Maximum terminal section: 10 mm² (force) / 4 mm² (control)
• Stuffing box configuration: 2xM20 (feeding and pump) / 2xM16 (control)
• Saved information (PumpCheck : identification number, pump running hours, number of starts, total number of alarms, current of last alarm trip
• Dimensions / weight / IP / temperature: 240 x 190 x 110 mm (height x width x depth) / 1820g / IP65 / -10º…+55º C