Resettable three-phase permanent + IGA
Combined protection device against permanent overvoltages, caused by increases in the network voltage, in three-phase installations, with automatic reconnection. It can also protect against voltage drops if this option is selected by the user by means of a front selector.
Ideal for the protection of electric vehicle charging circuits because it allows the automatic reconnection of the meter in case of a trip for exceeding the contracted power.
The equipment also has a switched contact output for remote fault indication. It also has a remote control input (run command) which, if not activated, the equipment does not work, it does not make the automatic reconnection. This allows us to cut the supply remotely, for example in the case of non-payment of the load quota or to activate the recharge point with the presence of the vehicle (loop detector or ultrasonic sensor).
Formed by IGA + Trigger/reset coil.
Manufactured according to the standards ITC-BT-52 and UNE-EN-50550 (POP).
This equipment DOES NOT PROTECT>/strong> against voltage surges TRANSITORY.
|Working tension||240 VAC|
|Power consumption||0,3 VA|
|Maximum section in terminals||25 mm²|
|Environmental margins||-20º…+70º C / 80% H.R.|
|DIN modules number||6|
|Shooting voltage||270 VAC ±2%|
|Response time||according to standard UNE-EN 50550|
|Undervoltage response time||10s|
|Nominal intensity||16, 20, 25, 40, 50, 63A|
|Cutting power||10 kA|
Codes and references
COMBI-PRO 4P16 – POP 3P+N 400Vac + IGA/MCB 4x16A
COMBI-PRO 4P20 – POP 3P+N 400Vac + IGA/MCB 4x20A
COMBI-PRO 4P25 – POP 3P+N 400Vac + IGA/MCB 4x25A
COMBI-PRO 4P32 – POP 3P+N 400Vac + IGA/MCB 4x32A
COMBI-PRO 4P40 – POP 3P+N 400Vac + IGA/MCB 4x40A
COMBI-PRO 4P50 – POP 3P+N 400Vac + IGA/MCB 4x50A
COMBI-PRO 4P63 – POP 3P+N 400Vac + IGA/MCB 4x63A