Transient and permanent surge protector. For two-phase lines. 240VAC power supply. With 10kA IGA. Imax= 15kA
Description
Protector against permanentovervoltages caused by mains voltagesurges, and against transient overvoltages caused by lightning strikes or mains switching, in two-phaseinstallations.
Consisting of IGA + one tripping coil + Vigivolt V2T-15B
Technical Specifications
| SPECIFICATIONS | VALUE |
| Operating voltage | 240VAC |
| Frequency | 50-60Hz |
| Power consumption | 0,1VA |
| Sección máxima de los terminales | 25mm2 |
| Environmental margins | -20º +70º C / 80% H.R. |
| Protection | IP20 |
| Mounting | Rail DIN 35 |
| No. of DIN modules | 4 |
| Directives | 2014-35-UE (LVD) 2014-30-UE (EMC) 2011-65-UE (RoHS) |
| Firing voltage | >265VAC ±2% |
| Surge response time | according to standard UNE-EN50550/63052 IEC-63052:2019 |
| Rated current | 16, 20, 25, 32, 40, 50, 63A (depending on model) |
| Curve | C |
| Cutting power | 10kA |
| Rated voltage Un | 230VAC (L/L) |
| Maximum voltage Uc | 320VAC (L/L) |
| Frequency | 50-60Hz |
| Protection level Up | <1,5kV (L/L) (L/PE) |
| Maximum discharge current (8/20µs) Imax | 15kA (L/L) (L/PE) |
| Rated discharge current (8/20µs) In | 8kA (L/L) (L/PE) |
| Surge response time | ≤25ns |
| Maximum cable cross-section at terminals | 16mm2 |
| Temperature ranges | -40º +80ºC |
| Protection | IP20 |
| Mounting | Rail DIN 35 |
| Tipe | 2 |
Codes and references
| CODE | REFERENCE |
| 10002803 | COMBI-2P16T15B |
| 10002804 | COMBI-2P20T15B |
| 10002800 | COMBI-2P25T15B |
| 10002805 | COMBI-2P32T15B |
| 10002801 | COMBI-2P40T15B |
| 10002806 | COMBI-2P50T15B |
| 10002802 | COMBI-2P63T15B |
PRODUCTS RELATED
CONTACT WITH US
