Relay for well filling control by means of a 24VAC solenoid valve. Control mode by means of probes or buoys. Power supply 230VAC. DIN rail mounting.
Description
Reservoir filling control module for solenoid valve
Tank filling control by level probes or buoys, and control of a solenoid valve at 24V, in a 3-module wide box for DIN rail mounting with 230V power supply.
It has front indication of voltage presence and solenoid valve position (open or closed), as well as front potentiometers for adjusting water sensitivity (hardness) and delay time before opening and closing the solenoid valve (surge).
Operation: When the tank level drops below the minimum probe, the solenoid valve opens and remains open until the level reaches the maximum probe. There is always a delay in the opening and closing of the solenoid valve, which can be adjusted.
The output contact is a voltage-free relay contact. It is activated and deactivated at the same time as the solenoid valve, and can be used to activate a tank filling signal.
Downloads
| (ES) Declaración UE de conformidad / (EN) EU Declaration of Conformity - TH-FILL.pdf | Download |
| (ES) Manual de usuario - TH-FILL - ED2.pdf | Download |
| (EN) User manual - TH-FILL - ED2.pdf | Download |
| (FR) Manuel de l’utilisateur -TH-FILL - ED2.pdf | Download |
| (РУ) Руководство пользователя - TH-FILL - ED2.pdf | Download |
Technical Specifications
| SPECIFICATIONS | VALUE |
| Feeding | 230 VAC 50/60 Hz |
| Signage | VOLTAGE and ELECTROVALVE |
| Response sensitivity | Adjustable from 60 to 200 Kohm |
| Probe voltage | 24 VAC 50 Hz |
| Slingshot intensity | 1.2 mA max. in short circuit |
| Maximum pump cross section | 2,5 mm2 |
| Contacto utilización | Voltage free, 5 A / 250 VAC max. |
| Dimensions (mm) / weight | 91 x 53 x 60 / 490 g |
Codes and references
| CODES | REFERENCES |
| 10002676 | TH-FILL |
PRODUCTS RELATED
CONTACT WITH US
