Conductive level control relay. Dual control mode (well and tank) Power supply 230/400VAC. Pluggable on undecal base. Control by 2 probes (well) and 1 buoy (reservoir)
Description
Probe level relay by conductive system Well or Reservoir Control. Adjustable sensitivity. Dual voltage 230 or 400 V. Pluggable on undecal base. Maximum and minimum probes. Remote control. Isolation of the auxiliary outlet (4 kV) in low voltage for buoy, pressure switch, etc. with complete safety for users.
Tank: Install the upper probe (Max.) immediately before the overflow and the lower probe (Min.) at the convenient height for the desired reservoir.
Well: Install the lower probe (Min.) higher than the suction valve. The height of the upper probe (Max.), in many cases, must be varied according to the time of year for optimal use of the well flow.
IMPORTANT: The probe cables must be sufficiently insulated, since a false ground contact would cause the equipment to malfunction.
Technical Specifications
| SPECIFICATIONS | VALUE |
| Signage | VOLTAGE and RELAY |
| Operating voltage | 240/400 VAC (otras tensiones, consultar) |
| Frequency | 50-60 Hz |
| Power consumption | 2 VA |
| Permissible voltage variations | +10% -20% |
| Response sensitivity | Adjustable from 3 to 60 Kohm |
| Voltage on probes | 12 VAC 50 Hz |
| Intensity in probes | 1.2 mA max. in short circuit |
| Maximum terminal cross-section | 2 x 2,5 mm2 |
| Contacto utilización | AC1 : 10 A - 250V AC AC11 : 2,5 A - 230V AC DC1 : 1 A - 250V DC DC11 : 5 A - 24V DC |
| Environmental margins | -10º +60º C |
| Average weight approx. | 140 g (320 g. incl. base y 2 sondas) |
Codes and references
| CODES | REFERENCES |
| 10000124 | TH6-230/400 |
| 10000125 | TH6C-230/400 |
PRODUCTS RELATED
CONTACT WITH US
