EXCLUSIVE OFFER
Tester for
referrals
CT6 is a unique electrical resistance tester on the market, as it emits an acoustic signal proportional to the resistance value.
Are you an APIEM member company? Fill out this form and get an exclusive offer of 10% discount on the CT6
The CT6 tester emits an acoustic signal proportional to the magnitude of the measurement (Ohm, Ω).
When an electrical contact is encountered, the equipment will emit a sharp signal.
If there is current leakage or bad contact, the sound will be severe.
If there is no electrical contact, the equipment will not emit a signal.
By connecting the leads to the terminals, CT6 will emit an increasingly low signal, which shows that the capacitor is being charged.
To test all types of semiconductor diodes, apply the test leads to the ends of the diode.
In these two cases, CT6 emits higher or lower acoustic signals.
We connect one end of CT6 to ground and the other to a cable that we will run down the borehole. When the cable comes into contact with water, CT6 will beep.
By connecting CT6 by phases to earth, we can detect shunts in specific phases.
The best detector and ready to use as soon as you get your hands on it.
ELEMENTS AND CONNECTIONS
OTHERS APPLICATIONS
CONTACT WITH US
Are you an APIEM member company? Fill out this form and get an exclusive offer of 10% discount on the CT6
