Control panel for tank filling by solenoid valve 24 VAC.
Solenoid valve control panel for tank filling. Supply voltage 230 VAC. Solenoid valve 24 VAC (other voltages on request).
Control mode by floats or probes.
Setting of the solenoid valve sensibility and protection against solenoid valve failure by setting a safety time delay (anti-wave system).
Low level contact output (solenoid valve activated).
This content is restricted.
You need to be logged in to download the manuals.
CODES | REFERENCES |
10002675 | ECO-FILL |
SPECIFICATIONS | VALUE |
Operating voltage | 230 VAC - 50/60 Hz |
Voltage on probes / floats | 24 VAC 50 Hz |
Intensity in probes / floats | 1.2 mA max. in short circuit |
Probes sensibility | Adjustable from 60 to 200 kohm |
Solenoid valve on/off delay | Adjustable from 5 to 40 seconds |
Solenoid valve output | 24 VAC / 16 VA max. |
Relay output (terminals 3 and 4) | Voltage-free. 5 A / 250 VAC |
Maximum terminal cross-section | 4 mm² (power) / 2,5 mm² (control) |
Cable gland configuration | 3xM16 |
Working temperature | -10...+55 ºC |
Degree of protection | IP65 |
Dimensions | 170x225x115 mm |
Net weight | 1,4 kg (1,64 kg including 3 probes) |
CONTACT WITH US
Development and manufacturing of electronic products and system integration: pump protection, level control and surge protection.
Links
Contact
© Toscano 2021 · All rights reserved | Quality and environmental policy |Legal notice | Privacy policy | Cookie policy
Si tienes preguntas o ideas que te gustaría compartir, envía un mensaje. Para algo más específico, por favor usa nuestros teléfonos de contacto.
Departamento comercial
Dirección
If you have questions or ideas you’d like to share, send us a message. For something more specific, please use one of the addresses below.
SalesDepartment
TechnicalSupport
Address
Modo isla para tus instalaciones fotovoltaicas. Cumple las nuevas ITC-BT-40 e ITC-BT-53