Transient and permanent surge protector. For three-phase lines. 400VAC power supply. Can be associated with maximum/emission coil 240VAC or contactor.
Description
Protector against permanent overvoltages caused by increases in mains voltage, and against transient overvoltages caused by lightning strikes or mains switching, in three-phase installations, which can be associated with any IGA or molded case on the market.
Downloads
| (ES) Manual de usuario - TRIO3.0 ED13.26 | Download |
| (ES) EU Declaration - Vigivolt Trio 3.0.pdf | Download |
| (EN) User manual - TRIO3.0 ED13.26 | Download |
| (FR) Manuel d'utilisation - TRIO3.0 ED13.26 | Download |
| (ES) Manual annex - TRIO3.0 Minimum coil mode ED4.26 | Download |
| (ES/EN/FR) Guía rápida / Quick guide / Guide rapide - TRIO3.0 ED2.26 | Download |
| (ES) Datasheet - TRIO3.0 ED3.26 | Download |
| (EN) Data sheet - TRIO3.0 ED3.26 | Download |
| (FR) Fiche technique - TRIO3.0 ED3.26 | Download |
Technical Specifications
| SPECIFICATIONS | VALORES |
| Rated voltage Un (L1-N, L2-N, L3-N) | 230 VAC |
| Alarm contact | 6 A / 30 VDC, 6 A / 250 VAC |
| Upstream protection | 40 A, Curve C (IEC 60898 / IEC 61009 / IEC 60947-2) |
| Fuse | 50 A gG (IEC 60269 / IEC 60127) |
| Frequency | 50-60 Hz |
| Consumption | 0.6 W |
| Maximum terminal cross-section | 35 mm² |
| Minimum cable cross-section (L1, L2, L3, N, PE) | 6 mm² |
| Minimum signal cable cross-section (TRA, TRB, NC, C, NO) | 1.5 mm² |
| Tightening torque (L1, L2, L3, N, PE) | 2.5 Nm |
| Tightening torque (TRA, TRB, NC, C, NO) | 2 Nm |
| Environmental limits | -20 ºC +70 ºC / 80% R.H. |
| Protection | IP20 |
| Mounting | Rail DIN 35 |
| No. of DIN modules | 4 |
| Dimensions (width x height x depth) | 72 x 91 x 65 mm |
| Approx. average weight | 395 g |
| Approx. packed weight | 430 g |
| Permanent overvoltage: Disconnection voltage (L1-N, L2-N, L3-N) | according to EN IEC 63052 |
| Permanent overvoltage: Overvoltage response time | according to EN IEC 63052 |
| Transient overvoltage: Protection level Up | ≤1.5 kV |
| Transient overvoltage: Maximum discharge current (8/20µs) Imax | 40 kA |
| Transient overvoltage: Type | 2 |
| Directives | 2014/35/EU (LVD), 2014/30/EU (EMC), 2011/65/EU (RoHS) |
| Standards | EN 61643-11, EN IEC 63052 |
Codes and references
| CODE | REFERENCE |
| 10003308 | TRIO 3.0 |
PRODUCTS RELATED
CONTACT WITH US
