Control and protection of 1 single/three-phase pump up to 22A 230/400 VAC selectable, with overload setting, pump anti-seize system, buoy control, pump temperature protection by Klixon input, high level alarm siren, high level independent voltage free contact alarm output and general alarm.
| SPECIFICATIONS | VALORES |
| Supply voltage | 230/400 VAC (seleccionable) |
| Permissible voltage variations | +/-20% (>30%: Auto-desconexion) |
| Control fuses (F1/F2) | F1: 0.3 A (primary) / F2: 2 A (secondary) |
| Maximum intensity | 16 A AC3 |
| Protections | Overload, phase failure and phase sequence, overheating and maximum running time |
| Display | LED 4 dígitos |
| Signage | Pump running, alarms, level status, max. intensity and max. running time |
| Overload setting (Imax) | 0,6 - 20,0 A |
| Self-calibration adjustment | +20% of fixed In (Rated current) |
| Setting the maximum running time | OFF - 30 seconds - 99 minutes |
| Sensor range 4-20 mA | 50cm, 100cm, 150cm, 200cm, 250cm, 300cm, 400cm o 500cm |
| 4-20 mA sensor fault detection | Short circuit (>23 mA) and open circuit (<3 mA) |
| Overload trip time | 7 seconds |
| Voltage on buoys/sensor 4-20 mA | 24 VDC |
| Alarm contacts | maximum AC1:2 A/250 VAC and AC11: 1 A/250 VAC |
| Signalling output | 24VAC (max. 500 mA) |
| Operating data (Datalogger) | Running hours, number of starts, number of alarms and intensity of the last alarm. |
| Control connection terminals | 4 mm2 |
| CODES | REFERENCES |
| 10000171 | V1B (Discontinued version) |
| 10004108 | V1B-E (Version 2022) |
PRODUCTS RELATED
CONTACT WITH US
