Description
Module for protection against transient overvoltages caused by atmospheric discharges, switching operations in electrical circuits and electrostatic discharges.
For BIPHASEcircuits, phase+phase, it is not valid for phase+neutral circuits, in this caseV2T-12,5/50 must be used.
It avoids the damage that these transient overvoltages may cause to the equipment supplied by this network.
Technical Specifications
| SPECIFICATIONS | VALUE |
| Rated voltage Un | 230 Vac |
| Maximum voltage Uc | 320Vac (L/L) |
| Frequency | 50-60Hz |
| Protection level Up | <1,5kV (L/L) /<1,5 kV (L/PE) |
| Impulse current (10/350us) Iimp | 12,5kA (L/L) |
| Maximum discharge current (8/20μs) Imax. | 50kA (L/L) |
| Rated discharge current (8/20μs) In | 20kA (L/L) |
| Surge response time | ≤25ns |
| Pre-fuse protection | 160A gL |
| Maximum cable cross-section at terminals | 35 mm2 |
| Temperature ranges | -40º +80ºC / 80% |
| Degree of protection | IP20 |
| No. of DIN modules | 2 |
| Mounting | Rail DIN 35 |
| Type | 1+2 |
| Directives | 2014-35-UE (LVD) 2014-30-UE (EMC) 2011-65-UE (RoHS) |
Codes and references
| CODE | REFERENCE |
| 10003080 | V2T-12,5/50B |
PRODUCTS RELATED
CONTACT WITH US
