TDS600

Variador de velocidad alterna/solar

Alternating frequency inverter / photovoltaic for solar pumping

Powered by mains or solar panel.
MPPT(maximum power point tracking) function.
MPPT + PIDfunction for constant pressure.
Multiconsign through digital inputs.
Automatic shutdown due to lack of water without probes (prevents dry running).
Broken pipedetection.
MODBUScommunication.
Easy configuration with quick guide.
Option: GSM + Bluetooth communication.

Advantages of the TDS600 frequency inverters:

Special application in solar pumping.
Energy saving.
Increased productivity.
Reduced operating and maintenance costs.
Reduced operating and maintenance costs.
High efficiency in wells with low recovery power.
Automation(multifunction inputs and outputs).
It is not necessary to remove the existing pump.
Alimentación: energía solar o corriente alterna (grupo electrógeno o red eléctrica), seleccionable.
Possibility of constant water storage.

This content is restricted.
You need to be logged in to download the manuals.

SPECIFICATIONS	VALUE
Tensión nominal	2S models: Single phase 220V, 50Hz/60Hz; 4T models: Three phase 380V, 50Hz/60Hz.
Recommended range	2S models: 200 ~ 260VAC 4T models: 320 ~ 460VAC
Recommended MPPT voltage	2S models: 220VAC: 330VDC 4T models: 380VAC: 550VDC
Recommended voltage range	2S models: 220VAC: 330 ~ 400VDC 4T models: 380VAC: 600 ~ 800VDC
Voltage	0 ~ 380V
Frequency	0 ~ 600Hz
Overload capacity	150% of rated current for 1 minute
Order of March	Control Panel, Digital Inputs and Communications. The channel can be changed by parameters and digital inputs.
Liaison function	You can execute the run command with the selected channel and synchronously switch to another channel.
Digital inputs	8 digital inputs, maximum frequency 1kHz. One of the digital inputs can be used as a high frequency or pulse width input (50kHz) Up to 14 digital inputs can be expanded.
Analytical entries	AI1 can be configured as 4 ~ 20mA or 0 ~ 10V AI2 can be configured as 4 ~ 20mA or -10 ~ 10V
Frequency input	0.1 ~ 20KHz
Analogue outputs	AO1 can be configured as 4 ~ 20mA or 0 ~ 10V AO2 can be configured as 4 ~ 20mA or 0 ~ 10V
Display	Various drive operating parameters and setting functions can be displayed.
Panel locking	All or part of the buttons can be locked
Environmental requirements	Indoor, non-dusty environment, no corrosive gases and no friendly fumes, no condensation or splashing water
Altitud	Below 1000m. (Above 1000 metres, the output capacity is reduced by 10% per 1000 metres of altitude).

you may also be interested in