Description
Digital control and protection module for pumps
Technical Specifications
| SPECIFICATIONS | VALUE |
| Supply voltage | 230/400 VAC |
| Permissible voltage variation | +/-20% (>30%: Self-disconnection) |
| Protections | Overload, Underload, Phase failure, Excessive frequency, Antiblocking |
| Direct outlet for pump | 12 A maximum |
| Display | LED 4 dígitos |
| Signage | Pump running, Alarm, Low level, Maximum current, Minimum current, Reset time. |
| Overload setting (Amp.max) | 0.6 - 40,0 A |
| Underload setting (Amp.min) | OFF - 0,5 - 39,8 A |
| Resetting time setting | 3 minutes - 99h or manual (Hand) |
| Overload skip time | 7 seconds |
| Time of jump per underload | 4 sec. (20 s at start-up ) |
| Probe voltage | 12 VAC |
| Probes sensibility | 10 K ± 15% Ω |
| External ON/OFF input | Contact or voltage 6 to 24 VAC/VDC |
| Alarm and auxiliary output | AC1: 2 A/250 VAC AC11: 1 A/230 VAC |
| Saved information | Running hours, number of starts, number of alarms and intensity of last alarm |
| Maximum terminal cross-section | 4 mm2 (force) / 2.5 mm2 (control) |
| Fixing | DIN rail |
| Working temperature | -10 +55ºC |
| Protection | IP20 |
| Measures | 3 modules, compatible with modular boxes |
| Software | V.2.0 |
Codes and references
| CODES | REFERENCES |
| 10005146 | TPM7-100/5-230-400 |
| 10003819 | TPM7-230/400 |
PRODUCTS RELATED
CONTACT WITH US
