Description
Module for protection against transient overvoltages caused by atmospheric discharges, switching operations in electrical circuits and electrostatic discharges.
For BIPHASEcircuits, phase+phase, it is not valid for phase+neutral circuits, in this case V2T-15 must be used.
Technical Specifications
| SPECIFICATIONS | VALORES |
| Rated voltage Un | 230 VAC |
| Maximum voltage Uc | 320 VAC |
| Frequency | 50-60 Hz |
| Protection level Up (L/L) | ≤1,5 kV |
| Protection level Up (L/PE) | ≤1,5 kV |
| Maximum discharge current (8/20μs) Imax (L/L) | 15 kA |
| Maximum discharge current (8/20μs) Imax (L/PE) | 15 kA |
| Nominal current (8/20μs) In (L/L) | 8 kA |
| Rated current (8/20μs) In (L/PE) | 8 kA |
| Surge response time | ≤25 ns |
| Maximum cable cross-section at terminals | 16 mm² |
| Maximum pre-fuse | 63 A gL |
| Dimensions (W x H x D) mm | 18 x 90 x 71 |
| Mounting | Rail DIN 35 |
| Product standards | IEC 61643-11 / EN61643-11 |
| Clase | II |
| Temperature ranges | -40º… +80º C |
| Degree of protection | IP20 |
| Fault indication | Window |
| Average weight approx. | 140 g |
| No. of DIN modules | 1 |
Codes and references
| CODE | REFERENCE |
| 10002749 | V2T-15B |
| 10003714 | V2T-15B+-MODULO |
PRODUCTS RELATED
CONTACT WITH US
