Digital energy meter. Power supply 230VAC single-phase. DIN rail mounting.
Description
Digital energy meter 230Vac single-phase, 5(45)A, DIN rail.
Downloads
| (ES) Manual de usuario / (EN) User manual / (FR) Manuel de l’utilisateur / (DE) Benutzerhandbuch / (IT) Istruzioni di installazione / (DK) Betjeningsvejledning - TEC-230D-ED1.pdf | Download |
Technical Specifications
| SPECIFICATIONS | VALUE |
| Feeding | Autonomous (through measured voltage) |
| Frequency range | 45...65 Hz |
| Consumption | ≤ 1 W, ≤ 8 VA |
| Current | Base: 5 A - Maximum (continued): 45 A - Minimum: 0.25 A - On: 0.02 A |
| Operating voltage | 230 V ac, -30%…+20% |
| Frequency | 50Hz (45-65 Hz) |
| Accuracy class - Active energy | Class 1 (EN62053-21) / Class B (EN50470-3) |
| Accuracy class - Reactive energy | Class 2 (EN62053-23) |
| Operating temperature | -25º…+55º C (-13º…+131º F |
| Storage temperature | -30…+80º C (-22…+176º F |
| Relative humidity | 0...90% (non-condensing at 40° C) |
| Pulse output | 1000 pulses/kWh. Proportional to the active energy measured (EN62052-31) |
| RS485 port output | Modbus Modbus RTU Protocol |
| M-Bus port output | M-Bus protocol, (EN13757-1), 3 frames |
| LED pulse ratio | 1000 pulses/kWh (EN50470-3, EN62052-11) |
| Duration LED | 90 ms |
| Maximum terminal cross-section | 1, 2, N: cross-section 2.5-6 mm², torque 1.1 Nm // 3-8: cross-section 1.5 mm², torque 0.4 Nm |
| Degree of protection | Front: IP51 // Terminals: IP20 |
| Dimensions (mm) / weight | 17,8 x 91,5 X 60 / 80g |
Codes and references
| CODES | REFERENCES |
| 10002200 | TEC-230D |
PRODUCTS RELATED
CONTACT WITH US
