Protection and control panel for 2 pumps (alternance). For lift stations, sewage or drainage applications.
| SPECIFICATIONS | VALUE |
| Supply voltage | 230/400 VAC (selectable) |
| Permissible voltage variations | +/-20% (>30%: Auto-disconnect) |
| Maximum intensity | 12 A AC3 |
| Protections | Overload, phase failure and phase sequence, overheating and maximum running time |
| Display | LED 4 digits |
| Signage | Pump running, alarms, level status, max. intensity and max. running time |
| Overload setting (Imax) | 0.6 - 20.0 A |
| Setting the maximum running time | OFF - 30 seconds - 99 minutes |
| Sensor range 4-20mA | 50cm, 100cm, 150cm, 200cm ó 250cm |
| Fault detection on 4-20mA sesnor | Short circuit (I >23mA) and open circuit (I <3mA). |
| Overload skip time | 7 seconds |
| Tension on the buoys | 24VDC |
| Alarm and auxiliary contact | maximum AC1:2A/250 VAC and AC11: 1A/230 VAC |
| Signalling output | 24VAC (max. 500 mA) |
| Saved information | Running hours, number of starts, number of alarms and intensity of the last alarm for each pump. |
| Control connection terminals | 4mm2 |
| Fixing | Direct or with fork clamps |
| Dimensions (mm) | 255 x 195 x 95 |
| Weight | 1,5 Kg |
| Working temperature | -10 +55ºC |
| Protection | IP56 |
| Software | V 1.0 |
| CODES | REFERENCES |
| 10000190 | V2B (Discontinued version) |
| 10004108 | V2B-E (Versión 2022) |
PRODUCTS RELATED
CONTACT WITH US
